Rear Drive Roller
Removal Procedure
1.
Turn off the printer and unplug the power cord.
2.
Remove the ribbon cartridge.
3.
Remove the
4.
Depending on the configuration of the printer, remove either the
Assembly
5.
If present, partially remove the smart card contact carrier:
A.
B.
C.
CP80 and CP80 Plus Service Manual
Main Enclosure
(page 6-52) or the
Insert a screwdriver between the carrier and the left mounting tab.
Twist the blade to pry the carrier out of the mounting tab.
It is not necessary to fully remove the carrier.
(page 6-15).
Magnetic Stripe Rocker Assembly
Rear Rocker
(page 6-88).
6-61