Smart Card Option; Smart Card Interface Board - DataCard CP80 Plus Service Manual

Smart Card Option

Smart Card Interface Board

Removal Procedure
1.
Unplug the printer.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
5.
Disconnect the interface and solenoid cables from the smart card interface
board. Refer to the
location and details.
6.
Remove the interface board from the main control board. The board needs to
be removed straight up to prevent damage to the connector.
A.
B.
C.
Follow-up Procedure
Using Diagnostics, perform the Smart Card Test Card procedure as described in
chapter 5 of this manual.
CP80 and CP80 Plus Service Manual
Main Enclosure
Upper Printer
Print Engine Cable
Squeeze the locking tab on one standoff and lift the board up slightly.
Repeat for the other standoff.
Gently pry the board off the connector.
(p. 6-15).
Assembly from the base (p. 6-38).
Connection Diagram (p. 6-11) for
6-89