Intermediate Transport Rollers and Card Guide
Removal Procedure
1.
Turn off the printer and unplug the power cord.
2.
Remove the
(page 6-38).
3.
Remove the
4.
Remove the intermediate idler roller:
A.
B.
5.
Carefully lift up on the card guide to remove it and the bias spring.
CP80 and CP80 Plus Service Manual
Main Enclosure
Upper Foil Drive Assembly
Simultaneously pull the shaft to the right and the chassis wall toward the
left (as viewed in the photograph).
When the tip of the shaft clears the pocket in the chassis, lift the shaft out.
(page 6-15) and the
Upper Printer Assembly
(page 6-126).
6-103