Magnetic Stripe Head - DataCard CP80 Plus Service Manual

Magnetic Stripe Head

Removal Procedure
1.
Turn off the printer and unplug the power cord.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
38).
5.
Unplug the magnetic head from the magnetic stripe board.
6.
Remove the
7.
Using a spring removal tool (small hook), pull up on the long pivot arm of
the magnetic head.
8.
Rotate the head so the wires are facing toward the card guide, and lower the
head through the chassis.
6-86
Main Enclosure (page 6-15).
Upper Printer Assembly
Magnetic Stripe Rocker Assembly
from the interstage platform (page 6-
(page 6-88).
Removal and Replacement