Contactless Smart Card Coupler
The components shown in this procedure may vary depending on the type of
coupler used, but the general procedure remains the same.
Removal Procedure
1.
Unplug the printer.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
5.
Use a screwdriver to press the plastic locking tabs out of the chassis.
6.
Remove the coupler bracket or plastic cover.
CP80 and CP80 Plus Service Manual
Main Enclosure
(p. 6-15).
Upper Printer
Assembly from the base (p. 6-38).
6-95