Laminator Motors; Card Transport Motor - DataCard CP80 Plus Service Manual

Laminator Motors

Card Transport Motor

Removal Procedure
1.
Turn off the printer and unplug the power cord.
2.
Remove the
(page 6-38).
3.
Remove the
4.
Remove the
5.
Remove the upper platen roller:
A.
B.
6.
Remove the two screws that secure the transport motor to the chassis.
6-120
Main Enclosure
Upper Foil Drive Assembly
Upper Heater Assembly
Open the retaining flap above the platen roller.
Lift the gear-end of the platen roller, and pull it out the side of the chassis.
(page 6-15) and the Upper Printer Assembly
(page 6-126).
(page 6-124) from the laminator.
Removal and Replacement