Pick Motor - DataCard CP80 Plus Service Manual

Pick Motor

Removal Procedure
1.
Turn off the printer and unplug the power cord.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Unplug the wires from the motor.
5.
To access the motor mounting screws, it is necessary to remove the
Hopper
A.
B.
CP80 and CP80 Plus Service Manual
Main Enclosure
(page 6-17).
Unsnap the rear transport feet from the base.
Slide the transport chassis back, and simultaneously pull forward on the
input hopper. Remove the card hopper.
(page 6-15).
Input
6-33