Printhead Cam
Removal Procedure
1.
Turn off the printer and unplug the power cord.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
38).
5.
Rotate the cam until the cam flag is clear of the sensor.
6.
Using a screwdriver, pry the flag-side of the cam out of the transport chassis.
7.
Gently lift the cam out of the chassis, taking care not to bind the gears.
Follow-up Procedure
Run the Printhead Cam Test in Diagnostics to verify that the motor is functional.
CP80 and CP80 Plus Service Manual
Main Enclosure
(page 6-15).
Upper Printer Assembly
from the interstage platform (page 6-
6-65