DataCard CP80 Plus Service Manual page 196

Record the Printer Network Settings
1.
Press the Enter key on the display to enter the status menu.
2.
Repeatedly press the Enter key to scroll through the network settings and
record each one as it is displayed.
• Address Mode
• Data Format
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
Removal Procedure
1.
Turn off the printer and unplug the power cord.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
5.
Disconnect all cables from the control board.
6.
Lift the board out of the base.
7.
If the printer is equipped with the magnetic stripe option, remove the
Magnetic Stripe Circuit Board
8.
If the printer is equipped with a smart card option, remove the
Interface Board
board.
6-44
Main Enclosure (page 6-15).
Upper Printer Assembly
(page 6-84) from the main control board.
(page 6-89) and the two standoffs from the main control
from the base (page 6-38).
Removal and Replacement
Smart Card