Stretching The Scanner Wire - Konica Minolta bizhub 500 Service Manual

Field Service Ver.2.0 Jan. 2007
6.3.16

Stretching the scanner wire

Note
• Be sure to wind the scanner wire around the pulley closely with no scanner wire overlapping each
other.
• When restretching or replacing the scanner wire, be sure to use the optics unit positioning jig.
• When restretching or replacing the scanner wire, be sure to conduct the image adjustment in the
service mode. (See P.185, P.186, P.187, P.188, P.189, P.190)
A. Procedure
[1]
[2]
Confidential – for internal use only, do not distribute
[3]
50gaf2c076na
1.
Remove the original glass. At this time, remove
also the glass attaching plate /Lw.
(See P.145)
2.
Remove the upper covers /Fr and /Lt.
(See P.147)
3.
Remove the upper cover /Rr.
(See P.147)
4.
Remove the operation panel.
(See P.149)
5.
Remove the operation panel unit /Lw assy.
(See P.154)
6.
Move the V-mirror unit [1] to the vicinity of the V-
mirror positioning hole [2].
7. Insert the optics unit positioning jig [3] into the V-
mirror positioning hole and fix the V-mirror unit.
Note
• Be sure to insert the optics unit positioning jig
[3] from the operation panel side and pass it
through the V-mirror unit.
6. OTHERS
157