Konica Minolta bizhub 500 Service Manual page 154

Hide thumbs Also See for bizhub 500:

Table of Contents

Field Service Ver.2.0 Jan. 2007

C. Forwarding Access Setting

To make the access setting for the Program Server which stores the Firmware data.

Select [Internet ISW] which is available from [Service Mode] → [System 2].

Touch [Forwarding Access Setting].

Select [User ID], and enter the user ID which is necessary for connecting to the Program Server on the on-

screen keyboard, and touch [END].

Select [Password], and enter the Password which is necessary for connecting to the Program Server on the

on-screen keyboard, and touch [END].

Select [URL], and enter the directory which stores the Program Server Address and the Firmware on the on-

screen keyboard by URL method, and touch [END].

• Enter the URL which matches to the Protocol to be used.

When connecting to http

When connecting to ftp

Select [File Name], and enter the file name of the Firmware data to be downloaded on the on-screen key-

board, and touch [END].

Touch [END] to finish setting.

Confidential – for internal use only, do not distribute

http://(host name or IP address)/directory name

or https://(host name or IP address)/directory name

ftp://(host name or IP address)/directory name

5. FIRMWARE VERSION UP

50gaf2e002ca

Chapters

Table of Contents

Bizhub 360 Bizhub 420