Konica Minolta bizhub 500 Service Manual page 127

3. PERIODIC CHECK
[2] [3]
[1]
94
[3] [2]
50gaf2c102na
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
14.
Remove the 2 fusing bearings /Lw [2] from the
fusing pressure roller [1].
Note
• When installing the fusing bearing /Lw, be
sure to install it with its collar section [3]
inside. Coat the cored bar section with
grease.
15.
Reinstall the above parts following the removal
steps in reverse.