Konica Minolta bizhub 500 Service Manual page 351

12. JAM CODE
Classification Jam code
Paper J-8100
feed
J-8200
PC-202 J-8300
PC-402
PC-202 J-8400
LU J-8500
Fusing J-9000
Reverse J-9100
ADU J-9200
J-9300
J-9701
J-9702
J-9703
318
Cause
The registration sensor (PS1) turns
ON while in idling.
The vertical conveyance sensor (PS2)
turns ON while in idling.
The vertical conveyance sensor /3
(PS116) turns ON while in idling.
The vertical conveyance sensor (PS2)
turns ON while in idling.
The vertical conveyance sensor /4
(PS126) turns ON while in idling.
The LU exit sensor (PS155) turns ON
while in idling.
The fusing exit sensor (PS3) turns ON
while in idling.
The reverse sensor (PS27) turns ON
while in idling.
The ADU conveyance sensor /1
(PS24) turns ON while in idling.
The ADU conveyance sensor /2
(PS25) turns ON while in idling.
The ADU conveyance sensor /1
(PS24) does not turn ON within a
specified period of time after the
reverse motor (M6) turns ON for
reverse rotation.
The ADU conveyance sensor /2
(PS25) does not turn ON within a
specified period of time after the ADU
conveyance sensor /1 (PS24) turns
ON.
The registration sensor (PS1) does
not turn ON within a specified period
of time after the ADU conveyance
sensor /2 (PS25) turns ON.
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
Resulting Correction
operation
The printer sec- Open the vertical con-
tion stops veyance door and ADU
immediately. and remove jammed
paper if any.
Open the right door
and remove jammed
paper if any.
Open the upper door
and remove jammed
paper if any.
Open ADU and remove
jammed paper if any.