Konica Minolta bizhub 500 Service Manual page 294

Field Service Ver.2.0 Jan. 2007
(3) Send
<SMTP server>
Functions • To set the SMTP sever address for transmission used for the CS Remote Care.
Use • To set the SMTP server address
• SMTP server address can be set by the IP address or the domain name.
Setting/ <Input IP Address>
Procedure • IP Address Version 4 format
[0 to 255].[0 to 255].[0 to 255].[0 to 255]
<Input FQDN>
• Enter the domain name.
<SMTP port number>
Functions • To set the SMTP port number for transmission used for the CS Remote Care.
Use • To set the Port Number of the SMTP Server.
Setting/ • The default setting is 25.
Procedure
<SMTP Connection Time-out>
Functions • To set the timeout period for transmission.
Use • To change the timeout period for connection during transmission.
Setting/ • The default setting is 60 Sec.
Procedure
<Authentication Setting>
Functions • To set whether or not to authenticate during transmission via SMTP server.
Use • To use when authenticating during transmission.
Available authentication mode: POP Before SMTP, SMTP authentication
Setting/ • The default setting is OFF.
Procedure
* Setting to "POP Before SMTP" will set the time for POP Before SMTP.
• The default setting is 60 Sec.
* When setting to SMTP authentication, touch the "Setting Check" key for authentica-
tion.
User ID
Password
Domain name
Confidential – for internal use only, do not distribute
"25" (1 to 65535)
"60 Sec" (30 to 300 Sec)
"OFF" POP Before SMTP
"60 Sec" (0 to 60 Sec)
: Enter the User ID for SMTP authentication.
: Enter the password for SMTP authentication.
: Enter the domain name for SMTP authentication.
10. SERVICE MODE
SMTP Authentication
261
1