Konica Minolta bizhub 500 Service Manual page 283

10. SERVICE MODE
Step
Using the telephone line
modem
12 Executing the initial transmission
1.
Select [Service Mode] → [CS Remote Care],
and touch [Detail Setting].
2.
Touch [initial transmission] key on the right
bottom of the screen to start initial transmis-
sion.
3.
When the machine is properly connected with
the Center, CS Remote Care setting screen
will be displayed.
NOTE
• The initial transmission key at the right
bottom of the screen will be displayed
only when the Center ID, the Device ID,
Telephone number of the Center and the
Device telephone number have been
input.
(See P.257)
*1: This procedure is available only when the optional Fax kit (FK-502) is mounted.
250
1
Using the Fax line
modem *1
Confidential – for internal use only, do not distribute
Procedure
Using E-mail
Receiving the initial connection E-mail message
Sending the initial connection E-mail message
from the Center to the address of the Copier.
NOTE
• When receiving the initial connection E-
mail message from the Center while CS
Remote Care-related screen is being
displayed, the current setting informa-
tion will be deleted, and CS Remote
Care setting will be displayed.
• For sending the initial connection E-
mail, see the manual for CS Remote
Care Center.
• Messages can
between the Center with initial connec-
tion and the Copier.
• The initial connection from the Center
will be carried out, and the E-mail
address of the Center will be stored in
the Copier.
• When the initial registration is complete,
the E-mail address of the Center will be
displayed by selecting [Service Mode] →
[CS Remote Care] → [Detail Setting],
[Basic Setting] → [E-Mail address].
Field Service Ver.2.0 Jan. 2007
be exchanged only