Replacing The Exposure Lamp - Konica Minolta bizhub 500 Service Manual

Field Service Ver.2.0 Jan. 2007
6.3.14

Replacing the exposure lamp

Note
• Be careful not to touch the lamp section of the exposure lamp (L1) with bare hands.
A. Procedure
[3] [2]
Confidential – for internal use only, do not distribute
1.
Remove the original glass. At this time, remove
[1]
also the glass attaching plate /Lw.
(See P.145)
2.
Remove the connector [1].
3.
Remove the harness clamp [2].
4.
Remove the 2 screws [3] and slide the exposure
lamp (L1) [4] for removal.
5.
Reinstall the above parts following the removal
steps in reverse.
[4]
[3]
50gaf2c073na
6. OTHERS
153