Konica Minolta bizhub 500 Service Manual page 690

Field Service Ver.2.0 Jan. 2007
Confidential – for internal use only, do not distribute
8.
Set the file transfer mode to binary transfer with
the [binary] command.
9. Transfer the data to be captured to PC with the
[get] or [mget] command.
10.
Exit from the command prompt.
NOTE
• If you set [Administrator Setting] - [Security
Setting] - [Security Details] - [Print Data Cap-
ture] to [Restrict] after acquiring the capture
data, the job data saved in the hard disk will
be deleted.
7. Data Capture
11