Konica Minolta bizhub 500 Service Manual page 315

10. SERVICE MODE
*11 Platen small size (8
Default setting is "1" for inch and "0" for metric.
*12 Density setting when selecting the printer toner
save function.
When "Toner save mode" for the printer driver turns
ON, set the printer density in the range shown in the
table.
*13 Adjustment of the image leading edge while in
the image rotation
While in the location in the 1-sided/2-sided copy,
adjust the slippage at the leading edge when there
occurs a leading edge slippage of 3 to 4 mm on the
back page.
*14 Adjustment of the image leading edge position
while in the platen memory copy
While in the platen copy, the paper exit direction is
reversed for the normal print and the memory print.
Adjust the discrepancy when the image leading edge
position is slipped.
*15 Selection of the transfer/separation output of the
user paper (tray)
Set the transfer/separation output that is applicable
when selecting the user paper in [Paper type] of [Util-
ity menu].
282
/ x 11/A4 or less) setting
1
2
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
Mode
A notice is made in a size detected by
APS.
A notice is made as A4 (Japan) /
8 / x 11 (inch) size.
1
2
Mode
Standard
– 4 (thin)
– 3
– 2
– 1
+ 1
+ 2
+ 3 (dense)
Mode
+ 0 mm
+ 0.5 mm
– 0.5 mm
+ 3.5 mm
– 3.5 mm
Mode
+ 0 mm
+ 0.5 mm
– 0.5 mm
+ 3.5 mm
– 3.5 mm
Mode
Normal paper (Japan)
Normal paper (inch)
Normal paper (metric)
Thick paper
Thin paper
Recycled paper
21-5
0
1
27-7 27-6 27-5
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
28-3 28-2 28-1 28-0
0 0 0 0
0 0 0 1
1 0 0 1
0 1 1 1
1 1 1 1
28-7 28-6 28-5 28-4
0 0 0 0
0 0 0 1
1 0 0 1
0 1 1 1
1 1 1 1
29-2 29-1 29-0
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1