Konica Minolta bizhub 500 Service Manual page 117

3. PERIODIC CHECK
[1]
[2] [5]
[3]
84
1
[4]
[7] [6]
50gaf2c091na
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
5.
Remove the connector [1].
6.
Remove the screw [2] and raise the fusing claw
assy [3].
7.
Remove the connector [4] from the fusing claw
assy.
Note
• When installing the fusing claw assy, be care-
ful not to neglect attaching the connector [4].
• When installing the fusing claw assy, be sure
to insert the positioning sections [6] at 2
places into each of the projections [7].
• When installing the fusing claw assy, be care-
ful not to damage the roller surface with the
tip of the claw.
8.
Reinstall the above parts following the removal
steps in reverse.