Konica Minolta bizhub 500 Service Manual page 245

10. SERVICE MODE
10.6.3 PM
Sets the PM execution cycle or resets the PM counter.
Note
• The PM cycle setting has been input in advance and be sure not to change this setting normally.
A. Procedure for the counter reset
1.
"Service Mode screen"
Press [Counter].
2.
"Counter/Data screen"
Press [PM].
3.
"PM Counter screen"
Check the PM counter.
When resetting it, press the Clear key.
4.
Press [OK].
B. Procedure for the cycle setting
1. "Service Mode screen"
Press [Counter].
2. "Counter/Data screen"
Press [PM].
3. "PM Counter screen"
Enter a PM cycle value (1 to 999999) through the copy count setting button and press [Set].
4. Press [OK].
212
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007