Konica Minolta bizhub 500 Service Manual page 596

Field Service Ver.1.0 Feb. 2006
D. Stapling
Staple filling method
Staple detection
Staple position *1
Manual staple
*1 In case of the 1-staple mode, conduct a parallel and a skew adjustment according to the length in the
main scan direction.
Parallel: main scan direction 182 to 216 mm
Diagonal: main scan direction 216 to 297 mm
E. Punch
No. of holes
Punch scraps full detection
F. Maintenance
Maintenance
M
G. Machine data
Power source
Power consumption
Dimensions
Weight
H. Operating environment
Temperature
Humidity
Note
• The information herein may be subject to change for improvement without notice.
Confidential – for internal use only, do not distribute
Dedicated staple cartridge (5000 staples)
Available (near empty: 20 remaining staples)
Rear: Diagonal 45° 1 point
Front: Diagonal 45° 1 point
Rear: Diagonal 28° 1 point
Front: Diagonal 28° 1 point
Rear: Parallel 1 point
Front: Parallel 1 point
Side: 2 points
None
Inch: 2 holes, 3 holes
Metric: 4 holes
None
Same as the main body.
24V DC ± 10 % (supplied from the main body)
64 W or less
538 (W) x 637 (D) x 978 (H) mm
39.2 kg
10 to 30 °C
10 to 80 % RH (with no condensation)
1. PRODUCT SPECIFICATION
Metric: A3, B4, A4, B5
Inch: 8 / x 11, 11 x 17
1
2
Metric: B4, B5
Inch: —
Metric: A4S, B5S
Inch: 8 / x 11S, 8 / x 14
1 1
2 2
A4, A4S, A3, B5, B5S, B4, 8
8 / x 14, 11 x 17
1
2
/ x 11, 8 / x 11S,
1 1
2 2
3