Konica Minolta bizhub 500 Service Manual page 349

12. JAM CODE
Classification Jam code
FS-510 J-7217
FS-511
FS-510 J-7218
FS-511
316
Cause
The entrance sensor (PS4) does not
turn OFF within a specified period of
time after the PS4 turns ON.
The conveyance sensor (PS5) does
not turn ON within a specified period
of time after the entrance sensor
(PS4) turns ON.
The path sensor (PS2) of RU does not
turn OFF within a specified period of
time after the PS2 turns ON.
The sub tray paper exit sensor (PS1)
of FS does not turn ON within a spec-
ified period of time after the path sen-
sor (PS2) of RU turns ON.
The main route conveyance sensor
(PS4) of FS does not turn ON within a
specified period of time after the path
sensor (PS2) of RU turns ON.
The bypass route conveyance sensor
(PS2) of FS does not turn ON within a
specified period of time after the path
sensor (PS2) of RU turns ON.
The main route conveyance sensor
(PS4) does not turn OFF within a
specified period of time after the PS4
turns ON.
The bypass route conveyance sensor
(PS2) does not turn OFF within a
specified period of time after the PS2
turns ON.
The intermediate conveyance sensor
(PS3) does not turn ON within a spec-
ified period of time after the main
route conveyance sensor (PS4) turns
ON.
The intermediate conveyance sensor
(PS3) does not turn OFF within a
specified period of time after the
bypass route conveyance sensor
(PS2) turns ON.
The conveyance sensor (PS5) does
not turn OFF within a specified period
of time after the PS5 turns ON.
The sub tray exit sensor (PS1) does
not turn OFF within a specified period
of time after the PS1 turns ON.
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
Resulting Correction
operation
FS, RU, MT, SD, Remove jammed paper
main body stop if any from the FS/main
immediately. body.