Configuring Dhcpv4 Relay - ZyXEL Communications GS2210 Series User Manual

Figure 42 Tutorial: Add Tag for Frames Received on Port 2
11 Click the Save link in the upper right corner of the web configurator to save your configuration
permanently.

6.3.3 Configuring DHCPv4 Relay

Follow the steps below to enable DHCP relay on the Switch and allow the Switch to add relay agent
information (such as the VLAN ID) to DHCP requests.
Click IP Application > DHCP > DHCPv4 and then the Global link to open the DHCP Relay
1
screen.
Select the Active check box.
2
Enter the DHCP server's IP address (192.168.2.3 in this example) in the Remote DHCP Server 1
3
field.
Select default1 or default2 in the Option 82 Profile field.
4
Click Apply to save your changes back to the run-time memory.
5
Chapter 6 Tutorials
GS2210 Series User's Guide
53