Ipv6 Configuration; Ipv6 Global Setup - ZyXEL Communications GS2210 Series User Manual

8.10.2 IPv6 Configuration

Use this screen to configure IPv6 settings on the Switch. Click the IPv6 Configuration link in the
Basic Setting > IPv6 screen. The following screen opens.
Figure 61 Basic Setting > IPv6 > IPv6 Configuration
The following table describes the labels in this screen.
Table 23 Basic Setting > IPv6 > IPv6 Configuration
LABEL
IPv6 Global
Setup
IPv6 Interface
Setup
IPv6
Addressing
IPv6 Link-
Local
Address
Setup
IPv6
Global
Address
Setup
IPv6 Neighbor
Discovery
IPv6
Neighbor
Discovery
Setup
IPv6 Neighbor
Setup
DHCPv6 Client
Setup

8.10.3 IPv6 Global Setup

Use this screen to configure the global IPv6 settings. Click the link next to IPv6 Global Setup in
the IPv6 Configuration screen to display the screen as shown next.
Chapter 8 Basic Setting
DESCRIPTION
Click the link to go to a screen where you can configure the global IPv6 settings on the
Switch.
Click the link to go to a screen where you can enable an IPv6 interface on the Switch.
Click the link to go to a screen where you can configure the IPv6 link-local address for an
interface.
Click the link to go to a screen where you can configure the IPv6 global address for an
interface.
Click the link to go to a screen where you can configure the IPv6 neighbor discovery settings.
Click the link to go to a screen where you can create a static IPv6 neighbor entry in the
Switch's IPv6 neighbor table.
Click the link to go to a screen where you can configure the Switch DHCP settings.
GS2210 Series User's Guide
84