Spanning Tree Protocol; Spanning Tree Protocol Overview; What You Can Do; What You Need To Know - ZyXEL Communications GS2210 Series User Manual

13.1 Spanning Tree Protocol Overview

The Switch supports Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP) and
Multiple Spanning Tree Protocol (MSTP) as defined in the following standards.
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.1s Multiple Spanning Tree Protocol
The Switch also allows you to set up multiple STP configurations (or trees). Ports can then be
assigned to the trees.

13.1.1 What You Can Do

• Use the Spanning Tree Protocol Status screen
status in the different STP modes (RSTP, MRSTP or MSTP) you can configure on the Switch.
• Use the Spanning Tree Configuration screen
STP modes on the Switch.
• Use the Rapid Spanning Tree Protocol screen
settings.
• Use the Rapid Spanning Tree Protocol Status screen
RSTP status .
• Use the Multiple Rapid Spanning Tree Protocol screen
configure MRSTP.
• Use the Multiple Rapid Spanning Tree Protocol Status screen
view the MRSTP status.
• Use the Multiple Spanning Tree Protocol screen
MSTP.
• Use the Multiple Spanning Tree Protocol Status screen
the MSTP status.

13.1.2 What You Need to Know

Read on for concepts on STP that can help you configure the screens in this chapter.
(Rapid) Spanning Tree Protocol
(R)STP detects and breaks network loops and provides backup links between switches, bridges or
routers. It allows a switch to interact with other (R)STP -compliant switches in your network to
ensure that only one path exists between any two stations on the network.
C
HAPTER

Spanning Tree Protocol

(Section 13.2 on page
(Section 13.3 on page
(Section 13.4 on page
(Section 13.8 on page
GS2210 Series User's Guide
121
124) to view the STP
124) to activate one of the
125) to configure RSTP
(Section 13.5 on page 127) to view the
(Section 13.6 on page 129) to
(Section 13.7 on page
132) to configure
(Section 13.9 on page
1 3
131) to
137) to view