Pppoe Ia Per-Port - ZyXEL Communications GS2210 Series User Manual

Table 125 Advanced Application > PPPoE > Intermediate Agent (continued)
LABEL
delimiter
Apply
Cancel

29.3.1 PPPoE IA Per-Port

Use this screen to specify whether individual ports are trusted or untrusted ports and have the
Switch add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent
on the Switch and there are no trusted ports.
Click the Port link in the Intermediate Agent screen to display the screen as shown.
Figure 188 Advanced Application > PPPoE > Intermediate Agent > Port
Chapter 29 PPPoE
DESCRIPTION
Select a delimiter to separate the identifier-string, slot ID, port number and/or VLAN ID
from each other. You can use a pound key (#), semi-colon (;), period (.), comma (,),
forward slash (/) or space.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS2210 Series User's Guide
269