Initial Setup Example; Overview; Creating A Vlan - ZyXEL Communications GS2210 Series User Manual

5.1 Overview

This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address

5.1.1 Creating a VLAN

VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this
with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 28 Initial Setup Network Example: VLAN
Click Advanced Application > VLAN > VLAN Configuration in the navigation panel and click the
1
Static VLAN Setup link.
C
H A PT ER

Initial Setup Example

GS2210 Series User's Guide
42
5