ZyXEL Communications GS2210 Series User Manual page 376

Table 190 SNMP Interface Traps (continued)
OPTION OBJECT LABEL
transceiver-ddm zyTransceiverDdmiTemperatur
eOutOfRange
zyTransceiverDdmiTxPowerOut
OfRange
zyTransceiverDdmiRxPowerOut
OfRange
zyTransceiverDdmiVoltageOut
OfRange
zyTransceiverDdmiTxBiasOutOf
Range
zyTransceiverDdmiTemperatur
eOutOfRangeRecovered
zyTransceiverDdmiTxPowerOut
OfRangeRecovered
zyTransceiverDdmiRxPowerOut
OfRangeRecovered
zyTransceiverDdmiVoltageOut
OfRangeRecovered
zyTransceiverDdmiTxBiasOutOf
RangeRecovered
Storm-control zyPortStormControlTrap
zuld zyZuldUnidirectionalDetected
zyZuldBidirectionalRecovered
Chapter 43 Access Control
OBJECT ID
1.3.6.1.4.1.890.1.15.3.84.3.1
1.3.6.1.4.1.890.1.15.3.84.3.2
1.3.6.1.4.1.890.1.15.3.84.3.3
1.3.6.1.4.1.890.1.15.3.84.3.4
1.3.6.1.4.1.890.1.15.3.84.3.5
1.3.6.1.4.1.890.1.15.3.84.3.6
1.3.6.1.4.1.890.1.15.3.84.3.7
1.3.6.1.4.1.890.1.15.3.84.3.8
1.3.6.1.4.1.890.1.15.3.84.3.9
1.3.6.1.4.1.890.1.15.3.84.3.10
1.3.6.1.4.1.890.1.15.3.78.2.1
1.3.6.1.4.1.890.1.15.3.110.3.1
1.3.6.1.4.1.890.1.15.3.110.3.2
GS2210 Series User's Guide
376
DESCRIPTION
This trap is sent when the
transceiver temperature is above or
below the normal operating range.
This trap is sent when the
transmitted optical power is above
or below the normal operating
range.
This trap is sent when the received
optical power is above or below the
normal operating range.
This trap is sent when the
transceiver supply voltage is above
or below the normal operating
range.
This trap is sent when the
transmitter laser bias current is
above or below the normal
operating range.
This trap is sent when the
transceiver temperature is
recovered from the out of normal
operating range.
This trap is sent when the
transmitted optical power is
recovered from the out of normal
operating range.
This trap is sent when the received
optical power is recovered from the
out of normal operating range.
This trap is sent when the
transceiver supply voltage is
recovered from the out of normal
operating range.
This trap is sent when the
transmitter laser bias current is
recovered from the out of normal
operating range.
This trap is sent when storm control
is detected on a specific port. A
packet filter action has been applied
on the interface.
This trap is sent when a
unidirectional link is detected.
This trap is sent when the port
which is shut down by ZULD
becomes active again.