Ipv6 Neighbor Discovery Setup - ZyXEL Communications GS2210 Series User Manual

Intelligent layer 2 gbe switch
Hide thumbs Also See for GS2210 Series:
Table of Contents

Advertisement

Table 27 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup (continued)
LABEL
Clear
Index
Interface
IPv6 Global
Address/Prefix
Length
EUI-64
Delete
Cancel

8.10.7 IPv6 Neighbor Discovery Setup

Use this screen to configure neighbor discovery settings for each interface. Click the link next to
IPv6 Neighbor Discovery Setup in the IPv6 Configuration screen to display the screen as
shown next.
Figure 66 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup
The following table describes the labels in this screen.
Table 28 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup
LABEL
Interface
DAD Attempts
NS Interval
Chapter 8 Basic Setting
DESCRIPTION
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This field displays the IPv6 global address and prefix length for the interface.
This shows whether the interface ID of the global address is generated using the EUI-64
format.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the entry(ies) that you want to remove and then click Delete to remove the selected
entry(ies) from the summary table.
Click Cancel to clear the check boxes.
DESCRIPTION
Select the IPv6 interface you want to configure.
The Switch uses Duplicate Address Detection (DAD) with neighbor solicitation and
advertisement messages to check whether an IPv6 address is already in use before assigning
it to an interface, such as the link-local address it creates through stateless address
autoconfiguration.
Specify the number of consecutive neighbor solicitations (from 0 to 600) the Switch sends for
this interface. Enter 0 to turn off DAD.
Specify the time interval (from 1000 to 3600000 milliseconds) at which neighbor solicitations
are re-sent for this interface.
GS2210 Series User's Guide
88

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents