Link Aggregation Setting - ZyXEL Communications GS2210 Series User Manual

Intelligent layer 2 gbe switch
Hide thumbs Also See for GS2210 Series:
Table of Contents

Advertisement

Table 61 Advanced Application > Link Aggregation Status (continued)
LABEL
Criteria
Status

17.3 Link Aggregation Setting

Click Advanced Application > Link Aggregation > Link Aggregation Setting to display the
screen shown next. See
Chapter 17 Link Aggregation
DESCRIPTION
This shows the outgoing traffic distribution algorithm used in this trunk group. Packets from
the same source and/or to the same destination are sent over the same link within the trunk.
src-mac means the Switch distributes traffic based on the packet's source MAC address.
dst-mac means the Switch distributes traffic based on the packet's destination MAC
address.
src-dst-mac means the Switch distributes traffic based on a combination of the packet's
source and destination MAC addresses.
src-ip means the Switch distributes traffic based on the packet's source IP address.
dst-ip means the Switch distributes traffic based on the packet's destination IP address.
src-dst-ip means the Switch distributes traffic based on a combination of the packet's
source and destination IP addresses.
This field displays how these ports were added to the trunk group. It displays:
Static - if the ports are configured as static members of a trunk group.
LACP - if the ports are configured to join a trunk group via LACP.
Section 17.1 on page 148
GS2210 Series User's Guide
for more information on link aggregation.
151

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents