ZyXEL Communications GS2210 Series User Manual page 332

Intelligent layer 2 gbe switch
Hide thumbs Also See for GS2210 Series:
Table of Contents

Advertisement

Table 160 IP Application > Static Routing > IPv4 Static Route (continued)
LABEL
DESCRIPTION
Gateway IP
Enter the IP address of the gateway. The gateway is an immediate neighbor of your Switch
Address
that will forward the packet to the destination. The gateway must be a router on the same
segment as your Switch.
Metric
The metric represents the "cost" of transmission for routing purposes. IP routing uses hop
count as the measurement of cost, with a minimum of 1 for directly connected networks.
Enter a number that approximates the cost for this link. The number need not be precise,
but it must be between 1 and 15. In practice, 2 or 3 is usually a good number.
Add
Click Add to insert a new static route to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to reset the above fields to your previous configuration.
Clear
Click Clear to set the above fields back to the factory defaults.
Index
This field displays the index number of the route. Click a number to edit the static route
entry.
Active
This field displays Yes when the static route is activated and NO when it is deactivated.
Name
This field displays the descriptive name for this route. This is for identification purposes only.
Destination
This field displays the IP network address of the final destination.
Address
Subnet Mask
This field displays the subnet mask for this destination.
Gateway
This field displays the IP address of the gateway. The gateway is an immediate neighbor of
Address
your Switch that will forward the packet to the destination.
Metric
This field displays the cost of transmission for routing purposes.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click Delete to remove the selected entry from the summary table.
Cancel
Click Cancel to clear the check boxes.
Chapter 38 Static Route
GS2210 Series User's Guide
332

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents