Setting Up Login Accounts - ZyXEL Communications GS2210 Series User Manual

Table 184 Management > Access Control > SNMP > User (continued)
LABEL
Delete
Cancel

43.4 Setting Up Login Accounts

Up to five people (one administrator and four non-administrators) may access the Switch via web
configurator at any one time.
• An administrator is someone who can both view and configure Switch changes. The username for
the Administrator is always admin. The default administrator password is 1234.
Note: It is highly recommended that you change the default administrator password
(1234).
• A non-administrator (username is something other than admin) is someone who can view but
not configure Switch settings.
Click Management > Access Control > Logins to view the screen as shown.
Figure 260 Management > Access Control > Logins
The following table describes the labels in this screen.
Table 185 Management > Access Control > Logins
LABEL
Administrator
This is the default administrator account with the "admin" user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password
New Password
Chapter 43 Access Control
DESCRIPTION
Click Delete to remove the selected entry from the summary table.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Type the existing system password (1234 is the default password when shipped).
Enter your new system password.
GS2210 Series User's Guide
368