Vlan Configuration; Configure A Static Vlan - ZyXEL Communications GS2210 Series User Manual
Intelligent layer 2 gbe switch
Hide thumbs
Also See for GS2210 Series:
- User manual (387 pages) ,
- Handbook (215 pages) ,
- User handbook manual (100 pages)
Table of Contents
Advertisement
9.3 VLAN Configuration
Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click Advanced Application
> VLAN > VLAN Configuration to see the following screen.
Figure 74 Advanced Application > VLAN > VLAN Configuration
The following table describes the labels in the above screen.
Table 35 Advanced Application > VLAN > VLAN Configuration
LABEL
Static VLAN Setup
VLAN Port Setup
Subnet Based VLAN Setup
Protocol Based VLAN Setup Click Click Here to configure the Protocol Based VLAN for the Switch.
Voice VLAN Setup
MAC Based VLAN Setup
9.4 Configure a Static VLAN
Use this screen to configure a static VLAN for the Switch. Click the Static VLAN Setup link in the
VLAN Configuration screen to display the screen as shown next.
Chapter 9 VLAN
DESCRIPTION
Click Click Here to configure the Static VLAN for the Switch.
Click Click Here to configure the VLAN Port for the Switch.
Click Click Here to configure the Subnet Based VLAN for the Switch.
Click Click Here to configure the Voice VLAN for the Switch.
Click Click Here to configure the MAC Based VLAN for the Switch.
GS2210 Series User's Guide
98
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
