When you see the message "Press any key to enter Debug Mode within 3 seconds..." press
3
any key to enter debug mode.
Type atlc after the "Enter Debug Mode" message.
4
Wait for the "Starting XMODEM upload" message before activating XMODEM upload on your
5
terminal.
After a configuration file upload, type atgo to restart the Switch.
6
The Switch is now reinitialized with a default configuration file including the default password of
"1234".
4.7 Logging Out of the Web Configurator
Click Logout in a screen to exit the web configurator. You have to log in with your password again
after you log out. This is recommended after you finish a management session for security reasons.
Figure 27 Web Configurator: Logout Screen
4.8 Help
The web configurator's online help has descriptions of individual screens and some supplementary
information.
Click the Help link from a web configurator screen to view an online help description of that screen.
Chapter 4 The Web Configurator
GS2210 Series User's Guide
41