Management Ip Addresses - ZyXEL Communications GS2210 Series User Manual

8.6.1 Management IP Addresses

The Switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
You can configure up to 64 IP addresses which are used to access and manage the Switch from the
ports belonging to the pre-defined VLAN(s).
Note: You must configure a VLAN first. Each VLAN can only have one management IP
address.
Figure 52 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 15 Basic Setting > IP Setup
LABEL
Default Management IP Address
DHCP Client
Static IP Address
Chapter 8 Basic Setting
DESCRIPTION
Select this option if you have a DHCP server that can assign the Switch an IP address,
subnet mask, a default gateway IP address and a domain name server IP address
automatically.
Select this option if you don't have a DHCP server or if you wish to assign static IP
address information to the Switch. You need to fill in the following fields when you
select this option.
GS2210 Series User's Guide
71