General Mvr Configuration - ZyXEL Communications GS2210 Series User Manual

Table 88 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering
Profile
LABEL
Profile Name
Start Address
End Address
Delete
Cancel

24.5 General MVR Configuration

Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for
each multicast VLAN. Click Advanced Application > Multicast > MVR to display the screen as
shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the
Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Chapter 24 Multicast
DESCRIPTION
This field displays the descriptive name of the profile.
This field displays the start of the multicast IPv6 address range.
This field displays the end of the multicast IPv6 address range.
To delete the profile(s) and all the accompanying rules, select the profile(s) that you
want to remove, then click the Delete button. You can select the check box in the table
heading row to select all profiles.
To delete a rule(s) from a profile, select the rule(s) that you want to remove , then click
the Delete button.
Click Delete button to permanently delete the entries you selected.
Click Cancel to clear the check boxes.
GS2210 Series User's Guide
204