36.3 OAM Configuration
Use this screen to turn on Ethernet OAM on the Switch and port(s) and configure the related
settings.
In the OAM Status screen click Configuration to display the configuration screen as shown.
Figure 222 Advanced Application > OAM > OAM Configuration
The following table describes the labels in this screen.
Table 156 Advanced Application > OAM > OAM Configuration
LABEL
Active
Port
*
Active
Chapter 36 OAM
DESCRIPTION
Select this option to enable Ethernet OAM on the Switch.
This field displays the Switch's port number.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select this check box to enable Ethernet OAM on this port.
Clear this check box to disable Ethernet OAM on the port.
GS2210 Series User's Guide
323