Vlan Status - ZyXEL Communications GS2210 Series User Manual

Figure 71 Switch Setup > Select VLAN Type
Static VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.

9.2 VLAN Status

Use this screen to to view and search all VLAN groups. Click Advanced Application > VLAN from
the navigation panel to display the VLAN Status screen as shown next.
Figure 72 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
Table 33 Advanced Application > VLAN: VLAN Status
LABEL
VLAN Search by
VID
The Number of
VLAN
The Number of
Search Results
Index
Chapter 9 VLAN
DESCRIPTION
Enter an existing VLAN ID number(s) (separated by a comma) and click Search to display
only the specified VLAN(s) in the list below.
Leave this field blank and click Search to display all VLANs configured on the Switch.
This is the number of VLANs configured on the Switch.
This is the number of VLANs that match the searching criteria and display in the list below.
This field displays only when you use the Search button to look for certain VLANs.
This is the VLAN index number. Click on an index number to view more VLAN details.
GS2210 Series User's Guide
96