Configure Vlan Port Settings - ZyXEL Communications GS2210 Series User Manual

Table 36 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup (continued)
LABEL
Add
Cancel
Clear
VID
Active
Name
Delete
Cancel

9.5 Configure VLAN Port Settings

Use the VLAN Port Setup screen to configure the static VLAN (IEEE 802.1Q) settings on a port. Click
the VLAN Port Setup link in the VLAN Configuration screen.
Figure 76 Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup
Chapter 9 VLAN
DESCRIPTION
Click Add to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to change the fields back to their last saved values.
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the check boxes.
GS2210 Series User's Guide
100