Classifier Configuration - ZyXEL Communications GS2210 Series User Manual

Click Advanced Application > Classifier in the navigation panel to display the configuration
screen as shown.
Figure 123 Advanced Application > Classifier > Classifier Status
The following table describes the labels in this screen.
Table 69 Advanced Application > Classifier > Classifier Status
LABEL
Index
Active
Weight
Name
Match Count
Rule
Clear

21.3 Classifier Configuration

Use the Classifier Configuration screen to define the classifiers. After you define the classifier,
you can specify actions (or policy) to act upon the traffic that matches the rules. To configure policy
rules, refer to
In the Classifier Status screen click Classifier Configuration to display the configuration screen
as shown.
Chapter 21 Classifier
DESCRIPTION
This field displays the index number of the rule. Click an index number to edit the rule.
This field displays Yes when the rule is activated and No when it is deactivated.
This field displays the rule's weight. This is to indicate a rule's priority when the match order
is set to manual in the Classifier > Classifier Global Setting screen.
The higher the number, the higher the rule's priority.
This field displays the descriptive name for this rule. This is for identification purpose only.
This field displays the number of times a rule is applied. It displays '-' if the rule does not
have count enabled.
This field displays a summary of the classifier rule's settings.
Select Classifier, enter a classifier rule name and then click Clear to erase the recorded
statistical information for that classifier, or select Any to clear statistics for all classifiers.
Chapter 22 on page 179.
GS2210 Series User's Guide
171