Configuring The Wan Port For Frame Relay; Figure 4-2 Configuring The Wan Port For Ppp Over Hdlc; Figure 4-3 Configuring The Wan Port For Frame Relay - ZyXEL Communications PRESTIGE 1400 User Manual

Prestige 1400 WAN Router with Integrated Ethernet Switch

Figure 4-2 Configuring The WAN Port for PPP over HDLC

To run PPP over HDLC directly without frame relay, the Line Type field in Menu 2.1.2 - Frame Relay Setup
must be set to None. To make sure frame relay is disabled, go to menu 2 and then to Menu 2.1.2 – Frame Relay
Setup. If the Line Type field is not None, press [SPACE BAR] to change it before saving the configuration.
4.2

Configuring The WAN Port For Frame Relay

Frame relay is a form of packet-switching technology that routes frames of information from source to destination
over a switched network. Frames are "relayed" through switches in the network.

Figure 4-3 Configuring The WAN Port For Frame Relay

4-2 WAN Port Setup