Initial Setup Example; Overview; Configuring An Ip Interface - ZyXEL Communications XGS4700-48F Manual

Layer 3 managed stackable gigabit ethernet switch

Hide thumbs Also See for XGS4700-48F:

Table of Contents

This chapter shows how to set up the Switch for an example network.

The following lists the configuration steps for the example network:

• Configure an IP interface

• Configure DHCP server settings

• Create a VLAN

• Set port VLAN ID

• Enable RIP

On a layer-3 switch, an IP interface (also known as an IP routing domain) is not

bound to a physical port. The default IP address of the Switch is 192.168.1.1 with

a subnet mask of 255.255.255.0.

In the example network, since the RD network is already in the same IP interface

as the Switch, you don't need to create an IP interface for it. However, if you want

to have the Sales network on a different routing domain, you need to create a

XGS4700-48F User's Guide

Initial Setup Example

Xgs4700 series