Motorola RFS6000 Reference Manual page 82

2-34 Motorola RF Switch CLI Reference Guide
Usage Guidelines
The
service password-encryption
the old password. Refer the note below for more clarification.
Example
RFSwitch#service diag ?
enable
identify
limit
period
tech-support-period
tech-support-url
RFSwitch#service diag enable
RFSwitch#service diag limit ?
buffer
fan
filesys
load
maxFDs
pkbuffers
procRAM
ram
routecache
temperature temperature limit
RFSwitch#service diag limit buffer ?
128 128 byte buffer limit
NOTE: The
no service password-encryption
disable the encryption, now requires the user to know the old
password. The user will have to enter the old password to disable the
encryption.
Earlier, using
no service password-encryption
encryption and
show running config
plaintext.
Now, the user has to user
to disable or change the password.
password key>
Enable in service diagnostics
identify this switch by flashing the
LEDs in a rapidly changing pattern
diagnostic limit command
Set diagnostics period
Set diagnostics tech-support-period
Set the URL to use during auto
generated technical support dumps
buffer usage warning limit
Fan speed limit
file system freespace limit
agregate processor load
maximum number of file descriptors
packet buffer head cache
percent RAM used by a process
percent free RAM
IP route cache usage
set by the user cannot be disabled without knowing
displayed the passwords as
no service password-encryption <old
command used to
disabled the