Motorola RFS6000 Reference Manual page 845

secure-beacon
set-vlan-user-limit [<1-
4094>|<vlan-list>]
<0-8192>
• server [primary|secondary] [<IP> {acct-port <port>}|
radius-key [0 <key>|2 <key>|<key>]] – Sets the primary or
secondary RADIUS server for the selected WLAN
• primary – Sets primary RADIUS server information
• secondary – Sets secondary RADIUS server
information
• <IP> – Sets the IP address of the RADIUS server
• acct-port <port> – Sets the optional radius server
accounting port. Default is 1813
• radius-key [0 <key>|2 <key>|<key>] – Sets the radius-
key for the RADIUS server
• 0 <key> – The key is sent unencrypted
• 2 <key> – The key is sent encrypted with the
password-encryption secret
• <key> – The shared key
• timeout <1-300> retransmit <1-100> – Sets the time
the switch waits for a response from the RADIUS
server before retrying. This is a global setting for both
the primary and secondary servers
• retransmit <1-100> – Number of retries before the
wireless switch will give up and disassociate mobile
unit
• <1-100> – Retry count
• reauth <30-65535> – Enable periodic reauthentication of
all associated mobile-units.
• <30-65535> – The reauthentication interval in seconds
Does not include the SSID of this WLAN in beacon frames
Sets user limits on VLANs for this WLAN
• [<1-4094>|VLAN] – VLAN range list. It can be either a
single index, a list (1,3,7) or a range (3-7) of indices
• [<0-8192>] – Sets the VLAN index. The limit is
<0-8192>
Wireless Instance 20-125