Use Case: Configuring Ip Standard Acl - Motorola RFS6000 Reference Manual

Hide thumbs Also See for RFS6000:

Table of Contents

15.2 Use Case: Configuring IP Standard ACL

IP Standard ACLs contain rules based on Source IP Address. You can create either a

Numbered IP Standard ACL or a Named IP Standard IP Address.

Execute the following CLI commands to configure an IP based standard ACL:

1. To configure numbered IP Standard ACL:

RFSwitch(config)#access-list 2 deny host 1.2.3.4 rule-

precedence 10

RFSwitch(config)#access-list 3 deny host 1.2.3.4 rule-

precedence 10

RFSwitch(config)#access-list 3 permit any rule-precedence

Valid numbers for numbered IP Standard ACLs are from 1-99 and 1300-1999. In the

above CLI example, ACL 3 denies host with IP 1.2.3.4 and allows all other hosts.

2. To configure an IP Standard ACL:

RFSwitch(config)#ip access-list standard ipst2

RFSwitch(config-std-nacl)#permit host 10.1.1.10 rule-

precedence 30

RFSwitch(config-std-nacl)#deny any rule-precedence 20

Standard ACL Instance

Show Quick Links

Table of Contents