Mark - Motorola RFS6000 Reference Manual

15.1.6 mark


Standard ACL Config Commands
Specifies packets to mark
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
mark [8021p|dscp|tos]
mark 8021p <vlan-priority-value>
mark dscp <dscp-codepoint-value>
mark tos <tos-value> [<source-IP/Mask>|any|host <IP>] {log}
{rule-precedence <1-5000>}
Parameters
8021p <vlan-priority-
value>
dscp <dscp-
codepoint-value>
tos <tos-value>
Sets the 802.1p VLAN user priority value to <vlan-priority-
value> (0-7)
Sets the Differentiated Services Code Point code-point value
to <dscp-codepoint-value> (0-63)
Sets the TOS value to <tos-value>. The least significant two
bits of the <tos-value> must be 0
Standard ACL Instance 15-9