5-126
Motorola RF Switch CLI Reference Guide
virtual-defrag [enable|
max-defrag-per-host|
max-frags-per-dgram|
min-1st-frag-length]
vlan-stacking permit
Example
RFSwitch(config)#firewall clamp
RFSwitch(config)#
Configures IPv4 virtual defragmentation.
• enable – enables IPv4 virtual defragmentation. Motorola
recommends that this option be enabled
• max-defrag-per-host <1-32> – Sets the maximum active
defragmentation per host to a value between 1 and 32
• max-frags-per-dgram <2-8129> – Sets the maximum
allowed fragmentation per datagram to a value between
2 and 8129
• min-1st-frag-len < <8-1500> – Sets the minimum
fragmentation length for the 1st fragment to a value
between 8 and 1500
Configures 802.1q VLAN stacking.
• permit – Permits 802.1q VLAN stacking that can bypass
the firewall. Motorola does not recommend the use of
this option