Set - Motorola RFS6000 Reference Manual

10-12 Motorola RF Switch CLI Reference Guide

10.1.8 set


Crypto Map Config Commands
Configures set parameters for the peer device
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
set [localid|mode|peer|pfs|remote-type {ipsec-l2tp|xauth}|
security-association|session-key|transform-set)
set localid [dn|hostname]<name>
set pfs [1|2|5]
set mode [aggressive|main]
set security-association [level|lifetime]
set security-association level perhost
set security-association lifetime [kilobytes|seconds]<value>
set session-key [inbound|outbound]{ah|esp}
set session-key [inbound|outbound] ah <hexkey data>
set session-key [inbound|outbound] esp <SPI>cipher<hexdata
key> authenticator <hexkey data>
set peer [ipaddress|<host name>]
set remote-type [ipsec-l2tp|xauth]
set transform-set <name>
Parameters
localid [dn|hostname]
<name>
Sets the local identity
• dn <name> – Defines the distinguished dn name
• hostname <name> – Sets the hostname
• <name> – The distinguished name or hostname