Wlan; Example-Creating A Group - Motorola RFS6000 Reference Manual

RFSwitch(config-radsrv-group)#

19.1.7.13 wlan

19.1.7.14 Example–Creating a Group
The
(config-radsrv-group)
1. Create a group called Sales in the local RADIUS server database.
RFSwitch(config-radsrv)#group sales
2. Check the RADIUS user group's configuration.
RFSwitch(config-radsrv-group)#?
RADIUS user group configuration commands:
3. Use a
RFSwitch(config-radsrv-group)#policy ?
day
time
vlan
wlan
RFSwitch(config-radsrv-group)#policy day weekdays
RFSwitch(config-radsrv-group)#policy time start 12 30 end 15 30
4. Use the
RFSwitch(config-radsrv-group)#policy vlan 10
5. Use the
WLAN.
RFSwitch(config-radsrv-group)#policy wlan 1 2 5
6. Use
(config-radsrv)#rad-user
the group.
RFSwitch(config-radsrv)#rad-user testuser password testpassword
group sales
Mar 07 17:41:55 2008: RADCONF: Adding user "testuser" into local
database
Mar 07 17:41:55 2008: RADCONF: User "testuser" is added to group
"sales"
command to configure group policies for the group created in Step 1.
policy
Day of access policy configuration
Configure time of access policy for this group
VLAN id for this group
Configure wlan access policy for this group
command to assign a VLAN ID of 10 to the Sales group.
policy vlan
command to allow only authorized users to access this group's
policy wlan
sub-instance is explained in the example below:
to create a user called testuser and add it to
Radius Server Instance 19-21