21.1.9 no
RTLS Config Commands
Negates a RTLS command or set its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
no [aeroscout|ekahau|reference-tag|service|site|
switch|ap|zone]
Parameters
aeroscout [enable|
multi-cast-listen|addr]
ekahau
[enable|engine|multicast]
reference-tag [rfid]
Negates aeroscout configuration
• enable – Disable SOLE adapter
• multicast-listen-addr– Configure multicast listening
address
Negates ekahau configuration
• enable – Disable aeroscout external engine
• engine –reset external location engine parameters
• multicast-listen-addr– Configure multicast listening
address
Negates reference-tag configuration
• rfid– Negates configuring rfid tag
RTLS Instance
21-11